As a redundant solution, the RED module continually monitors the condition of its two connected power supplies, and seamlessly migrates power draw from a failing supply to its counterpart. In a high-power solution, a RED module will feed up to the full capacity of both connected supplies to meet high demand conditions.

RED modules have low heat output thanks to MOSFET design. This extends useful life and reduces package size to improve control panel footprint and thermal impact. Diagnostic LEDs facilitate adjustment to equalize power draw across the connected power supplies. A relay output indicating status of the DC power can connect to an external controller to ensure synchronized operation.

Extensive certifications ensure RED modules comply to domestic and international safety standards, including application in many explosion-safe locations. RED modules support SolaHD SDN-C, SDN-D, and SDN-P power supplies, as well as 3rd party supplies capable of parallel operation. For redundant applications, choose the model that meets the load current requirement. For design assistance in high power applications, please contact SolaHD Technical Services.

Applications

• Hazardous Locations
• Process Control
• Critical Production
• Remote Location Features
• Redundant power supply operation with true isolation
• Compact size saves panel space
• Extensive diagnostics
• Load balancing support extends power supply life
• Use in hazardous locations, with T4 temperature rating
• Works with a wide variety of power supplies

Related Products

• SDN-C Series power supplies
• SDN-D Series power supplies
• SDN-P Series power supplies

Certifications and Compliances

• UL Listed, Ind. Control Equipment, E61379
  • UL 508, CSA C22.2 No. 107.1
• UL Recognized Component, ITE, E137632
  • UL/CSA 60950-1, UL/CSA 62368-1
• UL Recognized Component, Haz. Loc., E234790
  • UL 121201/CSA 213; Class 1 Div 2 Group ABCD T4
  • UL/CSA 60079-0, -7, -15
  • Class I, Zone 2, AEx ec nC IIC, Ex ec nC IIC
• Low Voltage Directive
  • IEC/EN 62368-1
• CB Certified
  • IEC/EN 60950-1, IEC/EN 62368-1
• ATEX Directive
  • EN IEC 60079-0, EN IEC 60079-7, EN IEC 60079-15
  • - II 3 G, Ex ec nC IIC Gc
• IECEx Certified
  • IEC 60079-0, IEC 60079-7, IEC 60079-15
  • Ex ec nC IIC Gc
• ABS Type Approved
• Certified
  • GB 3836.1, GB 3836.8