• CALL US: 570-823-6181 | FREE DOMESTIC SHIPPING ON ORDERS OVER $1,000 | Your trusted industrial supplier!

Home >
SolaHD SDN2X20RED SDN-C 20 Amp Redundancy Module for DIN Rail Power Supplies

20A Redundant | 40A Non-Redundant | DIN Rail

SolaHD SDN2X20RED SDN-C Redundancy Module 20A Redundant 40A Non-Redundant

SolaHD
List Price: $477.83
$
20 Amps Redundant | 40 Amps Non-Redundant
Input: 10.8–30.8 VDC
Nominal Voltage: 12–28 VDC
DIN Rail Mount
PowerBoost: 65 A for 5 seconds
  • Manufacturer:: SolaHD
Product Code: SDN2X20RED
UPC Code: 78347287377
Usually Ships in 24 to 48 Hours

SolaHD SDN2X20RED SDN-C Redundancy Module 20A Redundant 40A Non-Redundant

The SolaHD SDN2X20RED provides a common DC output from two connected power supplies for high-reliability redundant operation or higher-current power sourcing. It supports up to 20 Amps in redundant operation and 40 Amps in non-redundant operation, with a low-loss MOSFET design that minimizes heat and supports seamless transfer between connected supplies.

Product TypePower Supply Redundancy Module
Input Voltage Range10.8–30.8 VDC
Nominal Voltage12–28 VDC
Maximum Redundant Current20 Amps
Maximum Non-Redundant Current40 Amps
PowerBoost Current Capacity65 A for 5 seconds
Typical Voltage Drop0.2 V
Installation TypeDIN Rail Mount
SDN-C Power Supply Redundancy Modules

SolaHD SDN-C Redundancy Modules provide a common DC voltage feed from two connected power supplies for high-reliability redundant operation or higher-current power sourcing. Their low-loss MOSFET design minimizes heat, reduces panel space requirements and supports seamless transfer from a failing supply to the remaining source.

Diagnostic LEDs assist with load balancing, while a normally open Vout OK relay can communicate DC power status to an external controller. The modules support SolaHD SDN-C, SDN-D and SDN-P power supplies, along with compatible third-party supplies capable of parallel operation.

Applications
  • Hazardous locations
  • Process control systems
  • Critical production equipment
  • Remote installations
  • Redundant industrial control power
  • High-current DC power systems
Features
  • True-isolation redundant power supply operation
  • Low-loss MOSFET design with low heat output
  • Compact DIN rail housing saves control-panel space
  • Three two-color diagnostic LEDs for Vin1, Vin2 and Vout
  • Load-balancing support helps extend power supply life
  • Normally open Vout OK relay contact
  • Reverse-polarity protection
  • IP20 protection
  • Hazardous-location certifications with T4 temperature rating
  • Five-year limited warranty
Compatible Power Supplies
  • SolaHD SDN-C Series power supplies
  • SolaHD SDN-D Series power supplies
  • SolaHD SDN-P Series power supplies
  • Compatible third-party power supplies capable of parallel operation
Related Products
  • SDN-C High Performance DIN Rail Power Supplies
  • SDN-D High Performance DIN Rail Power Supplies
  • SDN-P DIN Rail Power Supplies
Specifications
See the Manufacturer's Data Sheet tab below for complete electrical specifications, certifications, dimensions, wiring and installation information.
SDN2X20RED,SolaHD SDN2X20RED,SDN-C redundancy module,SDN redundancy module,20 Amp redundancy module,20A redundancy module,40 Amp power module,40A power module,24 VDC redundancy module,DC redundancy module,redundant power supply module,MOSFET redundancy module,power supply ORing module,OR-ing module,DIN rail redundancy module,industrial redundancy module,SDN-C power supply accessory,SDN-D power supply accessory,SDN-P power supply accessory,Wallco Inc,Wallco Industrial Electronics,SolaHD,Sola Hevi Duty,Sola Hevi-Duty,Sola HD

Reviews

Average Rating:
( 0 )
Empty Cart