SolaHD STFV050-10N STFV Plus Tracking Filter with Surge Protection 5A 120V
The SolaHD STFV050-10N is a 5 Amps industrial panel-mount tracking filter that combines continuous high-frequency electrical noise filtering with integrated surge protection. Designed for 120 VAC single-phase power systems, the STFV Plus Series helps protect PLCs, control panels, machine tools and sensitive automation equipment from voltage transients, surges and electrical line noise.
| Part Number | STFV050-10N |
| Current SolaHD Ordering Number | STFV05010N |
| Current Rating | 5 Amps |
| Input Voltage | 120 VAC (0–150 Vrms) |
| Phase Configuration | Single Phase, 2 Wire + Ground |
| Line Frequency | 50/60 Hz |
| Installation Type | Hardwired Panel Mount |
| Peak Surge Current | 13,000 Amps Per Phase |
| Suggested Fuse / Circuit Breaker | 5 A Suggested / 6.25 A Maximum |
The SolaHD STFV Plus Series combines continuous tracking filtration for low-energy electrical noise with surge protection for high-energy voltage transients. The filter continuously monitors the incoming AC power line and responds to high-frequency noise and voltage disturbances produced by motors, machinery, contactors and other industrial equipment.
Unlike a basic surge protective device that primarily responds to transient events, the STFV Plus Series also provides continuous electrical noise attenuation. It reduces high-frequency noise by as much as -90 dB across frequencies from 100 kHz to 50 MHz, helping provide cleaner power to connected industrial control and automation equipment.
Applications- Industrial branch and control panels
- Factory automation installations
- Programmable logic controllers
- Point-of-use industrial service equipment
- Industrial machinery and machine tools
- PLC and HMI control systems
- Process control equipment
- Telecommunications and IT equipment
- OEM automation equipment
Features- Series-connected industrial tracking filter
- Integrated surge protection and electrical noise filtering
- 5 Amps continuous current rating
- 120 VAC single-phase input
- Transient protection in all modes: line-to-neutral, line-to-ground and neutral-to-ground
- 13,000 Amp peak surge current capability per phase
- High-frequency noise attenuation from 100 kHz to 50 MHz
- Maximum noise attenuation of -90 dB
- Response time of less than 5 nanoseconds
- High-impact plastic case
- Vacuum-impregnated magnetics and epoxy-encapsulated construction
- Hardwired series connection
- Panel-mount installation
- Green LED power indication
- Operating temperature from -40°C to +60°C at full load
- Greater than 100,000-hour MTBF
- Ten-year limited warranty
Related Products- STFE Elite DIN Rail Tracking Filters with Surge Protection
- STV25K DIN Rail Surge Protective Devices
- SolaHD Power Conditioners
- SolaHD Uninterruptible Power Systems
- SolaHD Industrial Power Supplies
SpecificationsSee the Manufacturer's Data Sheet tab below for complete electrical specifications, connection diagrams, dimensions, certifications, installation requirements and operating information.
STFV050-10N,STFV05010N,STFV050 10N,STFV 05010N,SolaHD STFV050-10N,SolaHD STFV05010N,Sola STFV050-10N,Sola STFV05010N,STFV Plus,STFV Plus Series,SolaHD STFV Plus,5 Amps tracking filter,5A tracking filter,120 VAC tracking filter,120V tracking filter,panel mount tracking filter,hardwired tracking filter,industrial tracking filter,active tracking filter,industrial power filter,industrial line filter,electrical noise filter,EMI filter,RFI filter,surge protection filter,surge protective filter,industrial surge protection,panel mount surge protection,power line conditioning,PLC surge protection,PLC power protection,control panel surge protection,factory automation power protection,machine tool surge protection,industrial automation filter,point of use power protection,13 kA surge protection,13000 Amp surge protection,Wallco Inc,Wallco Industrial Electronics,SolaHD,Sola Hevi Duty,Sola Hevi-Duty,Sola HD
